Aqua Horizon

The “Aqua Horizon” roofing

Our company presents the new aluminum system "TERRACE". The system consists of frame modules that allow our customers to simultaneously protect the pool and create a recreation area near the pool.

The system consists of durable, high-quality aluminum profiles that are protected by powder coating or anodization. All connecting and fastening elements are made of stainless steel. At the top of the frame, after assembly, you must insert and fasten the protective elements made of cellular polypropylene with silicone to prevent dust or water from entering the pool.

Given the many variants and style solutions, we offer our system in the form of a “frame-module system”.

You can choose between different terrace models to match our pool models.

There are different types of terrace solutions - either on the horizontal level or on the vertical level, separated in the middle or completely movable.

After you have decided on a terrace model, you will receive a ready-to-assemble frame structure that serves as a substructure for the terrace covering you have chosen. We recommend real wood or WPC as patio coverings.

To protect against dust and other types of dirt or debris, the gap is protected by a rubber seal or brush.

It should be noted that the installation of this terrace system is only suitable for pools that are at the same level as the surrounding ground level, i.e. the pool must be installed without an overhang, i.e. not protrude above the zero level.

Otherwise, a way must be found to raise the immediately surrounding floor level (pool edge area) so that the rails can be mounted on top so that they run on the same level.

The "Aqua Horizon" roofing can consist of 1 module.

Available sizes

The table below shows the dimensions of the main elements and notches for easy selection of the width/length of the required terrace modules.

The gap at the bottom of the decking structure to the ground ranges from 20mm to 45mm depending on the size of the frame. The frame height is 140 mm + distance below.

B1 - the bottom of the terrace construction to the ground / MIN

B2 - Distance from edge to wheel or bills

B3 - Minimum distance from wheel to pool